Table of Contents
Get the Right Aluminum for Your Part
Last updated on January 31st, 2024 at 09:21 am
Aluminum: the most popular construction metal after steel. This alloy has been used for metal fabrication for centuries, so it’s not surprising that there are so many aluminum grades to choose from.
Do you need 5052?
How about 6061?
Or maybe 7075?
Not quite sure? We’ve got you covered.
What Exactly Are Aluminum Grades?
Aluminum grades are metrics that aim to differentiate the specific alloy compositions, hardening processes, and heat treatability of unique types of aluminum.
Since not all aluminum grades have the same properties, the most important question when choosing an alloy is: How do you want to use your aluminum sheet metal?
Here are some factors to keep in mind:
- Strength. Do you need a high strength-to-weight ratio?
- Formability. Will you be shaping or bending?
- Machining. Will cutting, stripping, and the like be crucial to your process?
- Weldability. Does it need to be weldable?
- Rust Resistance. Is it important that the part does not corrode?
- Heat Treatability. Will you be applying heat in your design process?
- Availability. Lead time and cost may be shorter and lower if you choose a common alloy shops are likely to have in stock.
Approved Sheet Metal 6061-T6 vs 5052-H32
5052, 6061, 7075 Grade Aluminum Sheet Metal for Fabrication
| 5052 Aluminum Alloy | 6061 Aluminum Alloy | 7075 Aluminum Alloy |
|---|---|---|
| Strength: Good. The 5052 aluminum is one of the strongest alloys-in the non-heatable category. It’s strength makes it a favorite for sheet metal or plate applications. | Strength: Excellent. Stronger than 5052. | Strength: Excellent. 1.5 times stronger than the 6061. High strength-to-weight ratio. |
| Formability: Excellent. | Formability: Excellent. | Formability: Low. It’s harder than the 6061, which makes it difficult to form. |
| Machining: Low. The material is soft, which makes it difficult to machine. | Machining: Good. Though relatively softer than other alloys, the 6061 is harder than the 5052, which makes it easier to machine. | Machining: Excellent. |
| Weldability: Excellent. | Weldability: Excellent. | Weldability: Low. The metal tends to crack after welding. |
| Rust Resistance: Excellent. 5052 does not contain any copper, which makes it resistant to saltwater, too. | Rust Resistance: Good. The 5052 is better at resisting saltwater. | Rust Resistance: Excellent. Also resistant to saltwater. |
| Heat Treatability: Low. 5052 is not heat-treatable. Instead, cold-working methods (ex. cold forging) are used to strengthen it. | Heat Treatability: Excellent. | Heat Treatability: Excellent. |
| Use: The 5052 alloy is usually used for marine applications, medical devices, and even kitchenware. | Use: The most popular and cost-efficient aluminum alloy, the 6061 is used for many parts: from your typical bike to electrical equipment, to beverage cans. | Use: Its high strength-to-weight ratio makes the 7075 perfect for the aerospace, marine, military, and automobile industries. It is also one of the pricier alloys. |
At Approved Sheet Metal, we always have 5052, 6061, and 7075 on our rack and ready for your next part. If you need more help figuring out which grade is suitable for your sheet metal prototype, we’d be more than happy to help.
P.S. What else is on our rack? Get a complete list of our materials here.
Recommended Default Sheet Metal Tolerances
| DIM | Tolerance (MM) | Tolerance (Inches) | Description |
| A | ± 0.13 | ± 0.005 | Sheared Edge to Hole |
| B | ± 0.13 | ± 0.005 | 2 Holes on One Surface |
| C | ± 0.25 | ± 0.010 | Formed Edge to Hole |
| D* | ± 0.76 | ± 0.030 | Holes Across 2 Bends |
| E* | ± 0.76 | ± 0.030 | Holes Across 4 Bends |
| F | ± 0.25 | ± 0.010 | Sheared Edge to Bend |
| G | ± 0.38 | ± 0.015 | Across 2 Bends |
| H* | ± 0.76 | ± 0.030 | Formed Part |
* Dimensions D, E and H are not recommended forms of dimensioning
These tolerances are recommended and best practices. We can obtain tighter tolerances (depending on part geometry/ construction), contact us for more information Download PDF
Sheet Metal Aluminum Grades FAQ
What are sheet metal aluminum grades?
Aluminum grades are metrics that differentiate specific alloy compositions, hardening processes, and heat treatability of different types of aluminum. They help in selecting the appropriate alloy for specific applications.
Which aluminum grade should I choose?
The choice of aluminum grade depends on your intended use for the sheet metal. Consider factors such as strength-to-weight ratio, formability, machining requirements, weldability, rust resistance, heat treatability, and availability to determine the most suitable grade for your needs.
What are the characteristics of 5052 aluminum?
The 5052 aluminum alloy is known for its good strength, making it a preferred choice for sheet metal or plate applications. It has excellent formability, good weldability, high rust resistance (especially to saltwater), but low heat treatability.
What are the characteristics of 6061 aluminum?
The 6061 aluminum alloy offers excellent strength, surpassing that of 5052. It has excellent formability, good machining capabilities, excellent weldability, good rust resistance, and excellent heat treatability. It is commonly used in various applications, including bikes, electrical equipment, and beverage cans.
What are the characteristics of 7075 aluminum?
The 7075 aluminum alloy is known for its excellent strength-to-weight ratio, making it ideal for the aerospace, marine, military, and automobile industries. It has low formability, excellent machining capabilities, low weldability, excellent rust resistance (including saltwater), and excellent heat treatability. However, it is generally more expensive compared to other alloys.